Version 3 (modified by haway@…, 7 years ago) (diff)


IETF 82 Network Information(draft) - Taipei City, Taiwan

Terminal Room

The Terminal Room is located in V.I.P room on the 4 Level of the TICC and is open 24 hours a day beginning at 8:30am on Sunday, November 13th and ending at 12:30pm on Friday, November 18th. A help desk is being provided, hours are listed below. The room itself consists of approximately 74 seats providing some wired access and 110v North American power ports. There is also a duplex color printer available. Please note that this terminal room has, in fact, no terminals, PCs or other user-accessible machines. It is simply a place to get power, wired Internet access, help desk support, or print documents.

When using the Ethernet connections in the Terminal Room, IPv4 addressing is provided via DHCP. Please use Dynamic Auto-configuration for IPv6. To cut down on the mess, ethernet cables have not been installed to every seat in the Terminal Room.

Help Desk

The help desk located:

1F Left Side of TICC's lobby on 1F
2F Outside Room 201ABC And 201DEF
3F Outside Banquet Hall
4F Terminal Room

A help desk is being provided and will be manned the following hours:

Help Desk at 1F,2F,3F

Sunday 10:00 to 17:00
Monday 8:00 to 19:30
Tuesday 8:00 to 18:10
Wednesday 8:00 to 19:30
Thursday 8:00 to 18:10
Friday 8:00 to 13:30

Help Desk at 4F(Terminal room)

Sunday 8:00 to 20:00
Monday 8:00 to 20:00
Tuesday 8:00 to 20:00
Wednesday 8:00 to 20:00
Thursday 8:00 to 20:00
Friday 8:00 to 20:00

NOC and Ticketing

There are several ways to communicate with the NOC staff.

  1. Submit a new trouble ticket via the trac web interface. Filling in the following fields: "My MAC Address", "My Current Location", and "My OS" may expedite ticket processing. If you have an existing account on you can use your established credentials (email address and tools password) to log in.
  2. Send an email to with as much detail regarding your issue and configuration as possible.
  3. If you're on site and need direct network assistance (i.e - you have no network) please go to the helpdesk, which is located in the Terminal Room on the 4F in V.I.P. room.
  4. Use the Jabber room at noc @ to report issues or communicate with the NOC.

You can also use trac to review outstanding tickets before reporting an issue or to update outstanding tickets.

Network Basics

External Connectivity

The IETF 82 network connects to the Internet via two 1Gb/s links, provided by Chunghwa Telecom. The entire event is addressed out of the block for IPv4 and 2001:df8::/32 for IPv6. IPv6 is native and is supported by both providers. We are supplying bandwidth for the meeting spaces at the Taipei International Convention Center and in-room wired connections at the Grand Hyatt Taipei.

Meeting Room Wireless

An 802.11 a/b/g/n wireless network is being provided liberally throughout the venue hotel. 802.11n is only available on the 5Ghz frequencies.

To use the meeting room wireless network, associate with the beaconed SSID of "ietf" for 802.11a/b/g/n and "ietf-a" for 802.11a/n. IPv4 addressing is provided via DHCP. IPv6 clients should use Dynamic Auto-configuration, and may use DHCPv6 to retrieve name server information.

For those interested in more link-layer security, WPA SSIDs with 802.1X is available. The SSID is "ietf.1x". Do not use WPA-PSK as that will not work. Also, using TLS as an eap method is not adviseable, please prefer TTLS.

To use 802.1X:

  1. Associate to SSID: ietf.1x
  2. Use PEAP/MSCHAPv2
  3. Do Not Verify Server Cert and we won't verify yours :)
  4. Username (case sensitive): ietf
  5. Password (case sensitive): ietf

The proper operation of the wireless network requires the assistance of all users. One of the most significant issues with wireless performance in past IETF meetings has been wireless clients automatically, or accidentally initiating "ad-hoc" networks that act as the official IETF wireless network, causing other users to associate with false IETF wireless networks. Therefore, please disable your client's ability to create an ad-hoc network and as well as the ability to automatically join an ad-hoc network.

Experimental Networks

There are two experimental SSIDs. "ietf-v6ONLY" is there to demonstrate the current state of an IPv6 only Internet. Do not expect any services to be available via IPv4 on this SSID. There is also an SSID called "ietf-nat64" which is a demonstration of nat64 services. This network has a specific DNS server for use with the demonstration located at node 2001:df8:0:7::1.

SSID Access Credentials Purpose
ietf-v6ONLY None A IPv6-only network for investigating IPv6 in the absence of IPv4
ietf-nat64 None A demonstration of NAT64
eduroam Your eduroam credentials An instance of the eduroam project. See eduroam website

Guest Room Access

The IETF network will be available in the Hyatt from Sunday, November 13 through Friday November 18 in the following areas:

Guest room wired internet access: The IETF network will be limited to a certain number of floors at the Hyatt.

If you made your reservation in the IETF block your room will be on a specified floor with wired IETF network access. Because of the hotel equipment, there will not be IPv6 access. IETF attendees with reservations at the Hyatt outside of the IETF room block may request their room be on one of the floors access to the IETF network and the Hyatt will do their best to accommodate the request. Wireless in all guest rooms will remain on the Hyatt Hotel network, however, the hotel is increasing their available bandwidth to meet the expected increase in usage.

Public area wireless: The lobby, restaurants, and clubs on floors 1, 2, and 3 of the Hyatt will have IETF wireless access in most locations. This will include the full set of IETF SSIDs and services, including IPv6. Note that the Hyatt Hotel wireless will also be available in these areas.

This access is being provided thanks to the cooperation of the Hyatt and the hard work of the network team.


There is a printer in the Terminal Room and is available to all IETF users. The printers are RICOH MP2000L and RICOH SP C420DN.

Name Model Capabilities IPv4 Address IPv6 Address Notes Drivers
(not yet) RICOH MP2000L B&W Multifunctionals (not yet) / link
(not yet) RICOH C420DN Colour Laser Printer (not yet) / link

Instructions for Mac OS X using Bonjour auto-setup (DNS-Based Service Discovery)

  1. Open System Preferences -> Print & Fax -> "+" below printer list
  2. Choose "Default" in the top-menu.
  3. You should see the printers discovered by Bonjour. Pick the right one.
  4. Enjoy hassle-free printing.

Instructions for Mac OS X using manual configuration

  1. Open System Preferences -> Print & Fax -> "+" below printer list
  2. Select the "IP" icon at the top of window
  3. Select the "HP Jetdirect - Socket" from the drop down
  4. Enter "" in the Address field. Leave the Queue field blank.
  5. Print Using should autopopulate with "HP Color LaserJet CP2025" driver. If not, select it.
  6. Click Add

Instructions for Windows using Windows printing system (in Vista layout)

  1. If you haven't printed on selected printer before, download and install the driver (do not use any of "wizzard" or "automated" packages).
  2. Start -> Settings -> Printers & Faxes -> Add Printer -> Add Networked printer (and click Next) - some waiting time 3a. If you are hooked to wired network in terminal room, you are able to add all printers and you are done 3b. If you aren't hooked to wired network in terminal room, click STOP in searching printers
  3. Click "desired printer isn't in the list"
  4. "Add printer using TCP/IP address ..."
  5. Select "Type" as "TCP/IP device" and IP adrress of desired printer
  6. Select printer driver (you may need to choose it from package you installed in step 1) - Do NOT click "Windows Update"
  7. Click next (two or three times - depends on your windows version and drivers installed) and wait till the printer is added


The following network services are provided:

Service Address Notes
SMTP Will provide SMTP relay for anything within the IETF network
NTP A stratum 2 time service is provided via IPv4 and IPv6 unicast
DNS and Validating recursive resolvers. The domain name is

These services are being provided from both of the following servers: (IPv4) or 2001:df8:0:5::6/64 (IPv6) (IPv4) or 2001:df8:0:5::7/64 (IPv6)

The following services are provided for the experimental network(s):

Service Address Notes
DNS64 2001:df8:0:7::1 For ietf-nat64


The terminal room and IETF network are made possible by the generous contributions by a number of companies and by the tireless efforts of our volunteer team. If you see any of these people in the halls, please be sure to thank them for all their work!




Chunghwa Telecom


Bill Fenner
Bill Jensen
Bjoern Zeeb
Chris Elliott
Jim Martin
Lucy Lynch
Warren Kumari
Morgan Pirate Sackett
Joel Jaeggli


Nai-Wen Hsu
Mark Kao
HaWay? Liang
River Wu
Yung-Tai Lin
Huang Huang Cheng

/ /

Attachments (2)